BMR: 1979-2004 Mustang (Fox) Coilover conversion kit, rear, without control arm bracket (Red)

Increase traction and add ride height adjustability to the rear of your 1979-2004 Mustang with a Coil-Over Conversion Kit from BMR Suspension. OE-style lowering springs can drop the vehicle, but do so at the expense of suspension and shock travel. By utilizing a conventional coil-over, the vehicle can ride at a lower ride height, while still retaining full suspension travel. BMR manufactures its Coil-Over Conversion Kits from CNC-laser cut, CNC-formed 1/4-inch steel plate for strength, lightweight, and, precise fitment. Whether you want to aggressively lower your Mustang or you want the added suspension control you get with coil-overs, BMR makes it easy to add coil-overs to the rear of your car.

Designed for street performance, drag race, and handling applications, BMR makes its coil-over brackets from strong 1/4-inch laser-cut steel plate plate. These plates simply bolt in place and allow for commonly available coil-over shocks to bolt in. This kit is designed to work with any coil-over with a 1-inch wide bushing and -inch bolthole. When performance is a must, rely on BMR Suspension!

*NOTE: BMR designed the CCK009 with Viking Performance coilover shocks. BMR recommends Viking part number C209W shocks. The C209W shocks require 10-inch or 12-inch springs. BMR recommends a 12-inch spring for spring rates 150lb/in or less, and 10-inch springs for spring rates 175lb/in or higher.

BMR Suspensions CCK009 Coil Over Conversion Kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 2-3 hours. Proudly made in the U.S.A.!